{"product_id":"tpu","title":"TPU Filament. 1.75mm. 1kg Spool","description":"\u003cdiv class=\"notes-common\"\u003e\n\u003cdiv data-lang=\"en\"\u003e\n\u003ch2\u003eI. Usage Instructions\u003c\/h2\u003e\n\u003ch3\u003e1. Opening \u0026amp; Storage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeal the filament immediately after opening.\u003c\/li\u003e\n\u003cli\u003eStore in a sealed bag with desiccant when not in use for extended periods.\u003c\/li\u003e\n\u003cli\u003eAvoid high temperature and high humidity environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMoisture may cause:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased stringing\u003c\/li\u003e\n\u003cli\u003eUnstable extrusion\u003c\/li\u003e\n\u003cli\u003eSurface bubbles\u003c\/li\u003e\n\u003cli\u003eRough surface finish\u003c\/li\u003e\n\u003cli\u003ePoor layer adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e2. Pre-print Check\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm nozzle is clear with no clogs.\u003c\/li\u003e\n\u003cli\u003eKeep the print platform clean.\u003c\/li\u003e\n\u003cli\u003eSelect print parameters based on material type.\u003c\/li\u003e\n\u003cli\u003eRun a first-layer test before starting the full print.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3. Platform Adhesion Tips\u003c\/h3\u003e\n\u003ctable class=\"notes-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePlatform Type\u003c\/th\u003e\n\u003cth\u003eRecommendation\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePEI Steel Sheet\u003c\/td\u003e\n\u003ctd\u003eUsually no adhesive needed; apply glue if necessary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass Bed\u003c\/td\u003e\n\u003ctd\u003eRecommended to use solid glue for better adhesion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther Platforms\u003c\/td\u003e\n\u003ctd\u003eAdjust based on actual print results\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e4. Common Issue Troubleshooting\u003c\/h3\u003e\n\u003ctable class=\"notes-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eIssue\u003c\/th\u003e\n\u003cth\u003eSuggested Fix\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStringing\u003c\/td\u003e\n\u003ctd\u003eLower nozzle temp; increase retraction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClogging\u003c\/td\u003e\n\u003ctd\u003eCheck for moisture; reduce print speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarping\u003c\/td\u003e\n\u003ctd\u003eIncrease bed temp; improve enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRough surface\u003c\/td\u003e\n\u003ctd\u003eCheck drying status and temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoor layer bonding\u003c\/td\u003e\n\u003ctd\u003eIncrease nozzle temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"notes-material active\" data-tab=\"tpu\"\u003e\n\u003cdiv data-lang=\"en\"\u003e\n\u003ch2\u003eTPU Usage Parameters\u003c\/h2\u003e\n\u003ctable class=\"notes-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle Temp\u003c\/th\u003e\n\u003ctd\u003e230-250°C; Optimal: 230°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed Temp\u003c\/th\u003e\n\u003ctd\u003eOpen: 60°C; Enclosed: 45-60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Bed\u003c\/th\u003e\n\u003ctd\u003ePEI bed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdhesive\u003c\/th\u003e\n\u003ctd\u003eSolid glue, spray adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003ctd\u003eFlexible parts, anti-slip parts, cushioning parts, protective cases\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAvoid high temp\/humidity; seal with desiccant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying\u003c\/th\u003e\n\u003ctd\u003eDry at 50°C for 6-8 hrs; do not use high-temp oven directly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTPU is a flexible material; reduce print speed to avoid filament slippage.\u003c\/li\u003e\n\u003cli\u003eRemote extrusion printers are more challenging; prioritize using direct drive extruders.\u003c\/li\u003e\n\u003cli\u003eEnsure a smooth filament path; minimize bends and resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"CaiLab 3D Printer Filament","offers":[{"title":"Black T419","offer_id":67891014992160,"sku":null,"price":21.99,"currency_code":"USD","in_stock":false},{"title":"White T9003","offer_id":67891015024928,"sku":null,"price":21.99,"currency_code":"USD","in_stock":false},{"title":"Translucent TCL","offer_id":67891015057696,"sku":null,"price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/0707\/0240\/files\/T9003_260427_36087920-da54-409e-9c12-4cad9f517908.jpg?v=1792563102","url":"https:\/\/www.cailab3d.com\/products\/tpu","provider":"CaiLab 3D Printer Filament","version":"1.0","type":"link"}